Kierstin Elliot Exercise: Standing Side Splits Set Up: Stand with one foot on the carriage and one foot on the platform with weight distributed evenly between both legs. Slightly turn out your legs to help engage outer rotators and glutes. Lighter spring setting will focus on adductors (insides of legs) while a heavier spring setting focuses on abductors (outsides of legs). Execution: The breath for this exercise changes based on adductor or abductor focus. For adductors- inhale to push carriage away from the platform and exhale to pull carriage back in. For abductors- exhale to push carriage away and inhale to control the carriage back in. Move the carriage out only as far as you can go while maintaining good form, as soon as neutral pelvis shifts to a tilt or a tuck, you've gone too far. Focus: Be sure to keep the integrity of your form throughout the entire exercise. Keep a tall, stacked spine with ribcage over hips, neutral pelvis, and lifted arches. Think of a string lifting you up from the crown of your head. It’s common for the arches of your feet to drop, causing pronation. Keep that pinky toe connected to the machine. This will also keep the knees in correct alignment. Importance: Great postural exercise. It’s meant to focus on either adductor or abductor strengthening depending on desired resistance. As a whole, it draws attention to weight placement and how that affects your alignment while standing. Modifications: If you are apprehensive about balance, grab a pole or a long dowel and place that on the floor right in front of you while standing on the machine. If this exercise bothers your knees, keep a slight bend in them the whole time.